LiveZilla Live Chat Software

PRODUCTS - HEATER MIMIC PANCEL


PRODUCTS LINKS

The Heater Mimic Panel is to detect the healthy condition of heaters. It is used in the way by connecting number of heaters in series with the C.T. coil each. When the heater is in good condition the LED will glow in green color on front side of the panel. In case of OFF condition or failure of heater (like Insulation weak or discontinuity in heating cable), the front panel LED will glow in red color and also alarm will turn on from this, we conclude that the particular heater is not in working condition. When supply is not given to the heaters the LED’s will be turned off.

Functional Check:

230VAC / 5VDC converted power supply is provided. From that, wire has been taken and connected with the positive terminal of the transistor. We can find that all the LED blinks for 1 sec and the particular LED channel will glow in green color continuously that ensure all LED and PCB are healthy. Likewise each channel is checked. If we find any or some of the LED doesn’t glow at the time of functional check, the LED is to be checked.

Operational Check:

Connect all the heaters in series with the C.T. coil. Then, the power supply is switched ON. If the heaters are in healthy, all the LED will glow in green color otherwise particular or some of the LED will glow in red color and alarm will also activate. This type of mimic panel can be used up to 10A of current rating.